Stl Bills Posted January 8, 2009 Posted January 8, 2009 Alright so I have a bunch of really ugly laminate cabinets that I pulled out the basement of a rehab house I'm doing. I have another house that I was going to put white cabinets in and it dawned on me that I could save about 3500 if I could maybe just paint the ugly cabinets white. Only problem is these cabinets are not a solid wooden finish they are laminate. I've done some research and apparently there are some paints out there for such an application but i was wondering if anybody painted anything like this and how it turned out. I guess worst case scenario I'll do a test run on one cabinet and if it looks like crap I'll just buck up and buy the new ones. Anyone got any advice on painting on such a surface?
erynthered Posted January 8, 2009 Posted January 8, 2009 Alright so I have a bunch of really ugly laminate cabinets that I pulled out the basement of a rehab house I'm doing. I have another house that I was going to put white cabinets in and it dawned on me that I could save about 3500 if I could maybe just paint the ugly cabinets white. Only problem is these cabinets are not a solid wooden finish they are laminate. I've done some research and apparently there are some paints out there for such an application but i was wondering if anybody painted anything like this and how it turned out. I guess worst case scenario I'll do a test run on one cabinet and if looks like crap I'll just buck up and buy the new ones. Anyone got any advice on painting on such a surface? Great question. I too have been thinking about doing the same thing.
Stl Bills Posted January 8, 2009 Author Posted January 8, 2009 here is one article thanks millbank, I actually read that article but I'm still a little skeptical as to how its going to turn out....I'll let you guys know aftere this weekend.
BLZFAN4LIFE Posted January 8, 2009 Posted January 8, 2009 here is one article That articles is good advice. I would definitely go with the shellac based B-I-N ( won't scratch off). Use these mini-rollers to prime and paint the cabinets, they'll give you a smooth finish. Top coat with semi-gloss or gloss acrylic enamel paint.
BuffaloBud Posted January 8, 2009 Posted January 8, 2009 I had just the doors and faces painted, left the frames alone. It was a spray on paint that came out in a multi-colored speckeled finish. I can't remember the name of the paint though. Wasn't cheap either - about $75 for a gallon. I'll check my notes.
BuffaloBud Posted January 13, 2009 Posted January 13, 2009 Paint used was Zolatone. S-W has a similar product, but is called something else - don't know the name. I had a friend apply the paint as it is not a "at home" process and there is a bit of technique involved. Clear sealant was then applied. Zolatone linky
Recommended Posts